Interior Gateway Protocol (IGP) - Handles routing within an Autonomous System (one routing domain)., Exterior Gateway Protocol (EGP) - Handles routing between Autonomous Systems, RIP (Routing Information Protocol) - Is one of the oldest dynamic routing protocol used as a Interior Gateway Protocol that uses hop count as its primary routing metric to find the best path between the source and the destination network with a maximum hop count of 15., OSPF (Open Shortest Path First) - Is an Interior Gateway Protocol that uses link state routing to distribute routing information within a single Autonomous System., EIGRP (Enhanced Interior Gateway Routing Protocol) - Is an advanced distance vector routing protocol, also called hybrid routing protocol, that uses the properties of Distance vector routing protocol as well as link-state routing protocol., BGP (Border Gateway Protocol) - Is a exterior gateway protocol designed to exchange routing information among different autonomous systems on the Internet to determine the best possible network path., Distance Vector Routing - Is a routing protocol that uses the shortest hop count to a destination as its primary metric. Each router recieves a routing table, which contains information about the distance (hop count) to reach various destinations in the network., Link State Routing - The basic concept of this routing protocol is that every node constructs a map of connectivity to all other nodes in a network showing which nodes are connected to other nodes. Each node then calculates the next fastest logical path from itself to every possible destination in the network., Hybrid Routing - Is a network routing protocol that combines Distance Vector Routing Protocol (DVRP) and Link State Routing Protocol (LSRP) features., Static Routing - Is a pre-determined pathway used in computer networks where network administrators manually configure the routes into the routing table of routers., Default Routing - the route that takes effect when no other route is available for an IP destination address., Administrative Distance - Is a numerical value assigned to routing information to indicate the trustworthiness or reliability of a routing source., Time to Live (TTL) - The amount of time or hops that a packet is set to exist inside a network before being discarded by a router., Traffic Shaping - Is bandwidth management technique that delays the flow of network packets to ensure network performance for higher priority applications., Quality of service (QoS) - Is the use of mechanisms or technologies that work on a network to control traffic and ensure the performance of critical applications with limited network capacity., Autonomous System (AS) - Is a network or group of networks under one organization that follow defined routing polices, Bandwidth - Refers to the actual rate of data transfer, Throughput - Refers to the maximum rate of data transfer, Latency - Refers to the delay in network communication, Jitter - Refers to the a variance in latency or change in the amount of latency,
0%
Network+ N10-008 - Routing Technologies 2.2
शेयर
I3igwolf
द्वारा
कंटेंट को एडिट करें
एम्बेड
अधिक
कार्य
लीडरबोर्ड
अधिक दिखाएं
कम दिखाएं
यह लीडरबोर्ड अभी निजी है।
शेयर
पर क्लिक करें इसे सार्वजनिक करें।
इस लीडरबोर्ड को रिसोर्स ओनर ने डिसेबल कर दिया है।
यह लीडरबोर्ड डिसेबल है क्योंकि आपके विकल्प रिसोर्स ओनर से अलग हैं।
पूर्वस्थिति विकल्प
मैच अप
एक ओपन एंडेड टेम्पलेट है। यह लीडरबोर्ड के लिये स्कोर उत्पन्न नहीं करता है।
लॉग ईन आवश्यक
दृश्य शैली
फ़ॉन्ट
सदस्यता आवश्यक है
विकल्प
टेम्पलेट स्विच करें
सभी दिखाएं
गतिविधि (एक्टिविटी) खेलते समय अधिक फार्मेट दिखाई देंगे।
खुले परिणाम
लिंक कॉपी करें
क्यूआर कोड
डिलीट
ऑटो-सेव पुनःस्थापित करें:
?
