Interior Gateway Protocol (IGP) - Handles routing within an Autonomous System (one routing domain)., Exterior Gateway Protocol (EGP) - Handles routing between Autonomous Systems, RIP (Routing Information Protocol) - Is one of the oldest dynamic routing protocol used as a Interior Gateway Protocol that uses hop count as its primary routing metric to find the best path between the source and the destination network with a maximum hop count of 15., OSPF (Open Shortest Path First) - Is an Interior Gateway Protocol that uses link state routing to distribute routing information within a single Autonomous System., EIGRP (Enhanced Interior Gateway Routing Protocol) - Is an advanced distance vector routing protocol, also called hybrid routing protocol, that uses the properties of Distance vector routing protocol as well as link-state routing protocol., BGP (Border Gateway Protocol) - Is a exterior gateway protocol designed to exchange routing information among different autonomous systems on the Internet to determine the best possible network path., Distance Vector Routing - Is a routing protocol that uses the shortest hop count to a destination as its primary metric. Each router recieves a routing table, which contains information about the distance (hop count) to reach various destinations in the network., Link State Routing - The basic concept of this routing protocol is that every node constructs a map of connectivity to all other nodes in a network showing which nodes are connected to other nodes. Each node then calculates the next fastest logical path from itself to every possible destination in the network., Hybrid Routing - Is a network routing protocol that combines Distance Vector Routing Protocol (DVRP) and Link State Routing Protocol (LSRP) features., Static Routing - Is a pre-determined pathway used in computer networks where network administrators manually configure the routes into the routing table of routers., Default Routing - the route that takes effect when no other route is available for an IP destination address., Administrative Distance - Is a numerical value assigned to routing information to indicate the trustworthiness or reliability of a routing source., Time to Live (TTL) - The amount of time or hops that a packet is set to exist inside a network before being discarded by a router., Traffic Shaping - Is bandwidth management technique that delays the flow of network packets to ensure network performance for higher priority applications., Quality of service (QoS) - Is the use of mechanisms or technologies that work on a network to control traffic and ensure the performance of critical applications with limited network capacity., Autonomous System (AS) - Is a network or group of networks under one organization that follow defined routing polices, Bandwidth - Refers to the actual rate of data transfer, Throughput - Refers to the maximum rate of data transfer, Latency - Refers to the delay in network communication, Jitter - Refers to the a variance in latency or change in the amount of latency,
0%
Network+ N10-008 - Routing Technologies 2.2
Bendrinti
prie
I3igwolf
Redaguoti turinį
Įterpti
Daugiau
Lyderių lentelė
Rodyti daugiau
Rodyti mažiau
Ši lyderių lentelė šiuo metu yra privati. Spustelėkite
Bendrinti
, kad ji būtų vieša.
Ši lyderių lentelė buvo išjungta išteklių savininko.
Ši lyderių lentelė yra išjungta, nes jūsų parinktys skiriasi nuo nustatytų išteklių savininko.
Grąžinti parinktis
Rask tinkamą
yra neterminuotas šablonas. Jis negeneruoja rezultatų lyedrių lentelei.
Reikia prisijungti
Vizualinis stilius
Šriftai
Būtina prenumerata
Parinktys
Pakeisti šabloną
Rodyti viską
Pradėjus veiklą bus rodoma daugiau formatų.
Atviri rezultatai
Kopijuoti nuorodą
QR kodas
Naikinti
Atkurti automatiškai įrašytą:
?